Charge your Novaa fully using the included USB-C cable before first use. Once charged, simply insert any Dragonfly or Betty pod into the top of the device. You'll feel a short vibration and the LED will illuminate, confirming the pod is detected and ready. Inhale gently to activate — no buttons required.

The Novaa uses Smart POD Detection to automatically identify your pod type and set the ideal temperature. A green light indicates a Cured Resin or Distillate pod, blue means Live Resin or Live Rosin, yellow signals Live Diamonds, and white indicates a 2nd Generation pod. A red flash after a triple-insert confirms you've switched to the higher temperature setting.

For thicker oils or cold weather, quickly insert and remove the pod twice within 3 seconds. The status light will pulse for about 5 seconds, and the device will vibrate when preheat is complete. This warms the oil to improve airflow and vapor production.

The Novaa defaults to Level 1 (standard temperature) to maximize flavor and terpene retention. If you prefer stronger vapor, quickly insert and remove the pod 3 times within 3 seconds. A red light confirms the temperature increase. To return to Level 1, repeat the triple-insert process.

Activate Preheat Mode by inserting and removing the pod twice. Once the device vibrates, try blowing gently through the pod for 1-3 seconds to clear the airpath. This loosens thick oil that may have settled in the mouthpiece. If the issue persists, ensure you're storing your pods upright and at room temperature.

Battery life varies depending on draw length and frequency, but you can expect a full day of moderate use on a single charge. When the LED dims or the device stops producing vapor, connect the USB-C cable. A solid white light means the battery is fully charged and ready to go.

The Novaa is designed exclusively for Dragonfly and Betty pods. These pods are engineered to work with the Novaa's Smart POD Detection system, which automatically adjusts temperature based on the oil type. Third-party cartridges or 510-thread carts are not compatible.

Wipe the pod connection area periodically with a cotton swab dipped in 90%+ isopropyl alcohol to remove any oil residue that may interfere with the connection. Allow the area to dry completely before reinserting a pod. Do not submerge the device in water or use liquid cleaners on the electronics. If you notice reduced airflow, try the Preheat/Clog Remover function before cleaning.

Yes. If you experience any issues with your Novaa device, please visit dragonflyprocessing.com/m or contact your local Dragonfly Wellness pharmacy for assistance.

Level 1 is the default setting, optimized for flavor and terpene preservation — ideal for live resin and rosin pods. Level 2 runs at a higher temperature for thicker vapor production, which some patients prefer for distillate pods or when looking for stronger effects. Most patients find Level 1 delivers the best overall experience.

Yes. If you experience any issues with your Novaa device, please visit dragonflyprocessing.com/m or contact your local Dragonfly Wellness pharmacy for assistance. Keep your original receipt as proof of purchase.